 |
CDM-ISO-FLOOR
CDM
has 5 standard types of floating floor systems. In addition
to the standard systems, tailor-made solutions are often used
to achieve project specific requirements.
 |
|
 CDM-ISO-FLOAT
– Pre-Manufactured Concrete Floating Floor
System
CDM-ISO-FLOAT consists of pre-manufactured formwork
panels with the elastomer or spring bearings and
sound absorption pre-glued to the underside of the
formwork. The system can be tuned to meet project
specific requirements.
CDM-ISO-FLOAT
data sheet |
 |
 |
|
 CDM-ISO-LAT
– Isolation Battens for Floating Floors
CDM-ISO-LAT battens can provide the support for
formwork for concrete floating floors or for dry
floating floors giving bearing natural frequencies
of 6Hz and above. The system can be fitted on site
to accommodate all room shapes and can be designed
to meet project specific performance requirements
CDM-ISO-LAT
data sheet |
|
 |
|
 CDM-ISO-MONT
– Jack-Up Concrete Floating Floor System
CDM-ISO-MONT jacks are used with elastomer or spring
bearings to provide jack-up floating slabs. The
bearings are always accessible and therefore re-placeable
giving a fully flexible system with a guaranteed
de-coupling.
CDM-ISO-MONT
data sheet |
|
 |
|
 CDM-ISO-MAT
– Continuous Layer Floating Floor
CDM-ISO-MAT is a continuous layer isolation solution
for wet and dry floating floor constructions. The
correct product will be selected from the wide range
of CDM materials depending on project specific performance
requirements.
CDM-ISO-MAT
data sheet |
|
CDM-UK,
PO
Box 7035, Melton Mowbray, Leicestershire, LE13 1WG
Tel: +44 (0)1664 482486
|
|
CDM-ISO-SPRUNGFLOOR
– Sprung Floors for Dance and Gym